CLAREX Light Guide Reflector (LGR)
Clarex Light Guide Reflector has been developed for edge lit LCDs.
- Light guide type backlight filter for LCDs.
- It is an excellent light conductor because it is made of pmma (acrylic).
- Diffuses and reflects the light (internal and external) for an efficient display.
- No birefringence or double refraction.
- Available from 0.6mm thickness
- Close tolerance and uniform thickness.
- Ultra smooth glass-like surface.
- Excellent weather resistance.
- Many standard substrate colours available.
- Versatile substrate suitable for laser cutting, milling, printing, forming etc.
Contact us: 01296 622180
CLAREX Light Guide Reflector Product Specification Data:
- Light guide type backlight filter for LCD's.
- 0.6mm to 5.0mm (in 0.1mm increments)
Please contact us if you require another thickness.
| PROPERTIES | METHOD | UNIT | VALUE |
| Reflective Index | ASTM D-542 | 1.49 | |
| Heat Distortion Temperature | ASTM D-648 | °C | 110 |
| Maximum Recommended Continuous Temperature | 2 | °C | 80 |
| Coefficient of Thermal Expansion | ASTM D-696 | cm/cm/°C | 7 x 10-5 |
| Pencil Hardness | 2H | ||
| Heat Resistance | 80°C x 100hr | No Change | |
| Cold Resistance | -40°C x 100hr | No Change | |
| Humidity Resistance | 60°C x 90% x 100hr | No Change | |
| Thermal Cycle | -40°C<->80°C (10 cycles) | No Change |
| REAGENT | CHANGE OF APPEARANCE |
| Ethyl Alcohol (50%) | No Change |
| Isopropyl Alcohol | No Change |
| Soap Aqua Solution | No Change |
| Benzene | Swollen |
Speak To Us Today About Your Acrylic Requirements
We are happy to answer technical product questions that you may have, including application usage. Further product technical data can also be provided upon request.