CLAREX Non-Glare (NG) Sheet
CLAREX Non-Glare (NG) sheets incorporate very fine etching on the front and /or rear surface.
- Non-Glare pattern is cast into material during manufacture (not a coating).
- Diffuses surface reflection of light.
- Enhances the clarity of the display for better readability and viewing images.
- Excellent optical characteristics.
- No birefringence or double refraction.
- Excellent weather resistance.
- Non-Glare can be applied to front and/or rear surfaces.
- Available with scratch-resistant Hard Coating.
- Anti-Reflection Coating surface treatment also available for improved light transmission.
- A variety of standard substrate colours or bespoke colour matching is available.
- Versatile substrate suitable for laser cutting, milling, printing, forming etc.
Contact us: 01296 622180
CLAREX Non-Glare (NG) Sheet Product Specification Data:
- Display front panel for LCD, PDP, OLED, VFD, CRT, LASER, LED, etc.
- Display monitor enhancement
- Protective display lens
- Automotive displays
- Architectural Models
- Dial Lens
- Name Plate
* Machining and printing available to customer specification. Please see out Machining and Fabrication page or Contact US for more information
Please note we offer colour matching available to meet your requirements, contact us to learn more.
- 0.2mm to 5.0mm (in 0.1mm increments)
Please contact us if you require another thickness.
- 400 x 550mm
- 1000 x 1000mm (without Hardcoating)
| Non-Glare Grade | Total Light Transmittance (%) | Haze (%) | Gloss Value (%) |
| No.1 | 92 | 2.0 | 55 |
| No.1 / No.1 | 91 | 6 | 55 |
| No.2 | 90 | 6.0 | 35 |
| No.3 | 97 | 90 | 2 |
| No.9 | 92 | 1.0 | 78 |
| EX20 | 92 | 4.0 | 57 |
| EX30 | 91 | 7.0 | 45 |
| EX30/EX30 | 91 | 10 | 45 |
| EX70 | 92 | 3.0 | 72 |
| M-55 | 90 | 17.0 | 25 |
| Properties | Method | Unit | Normal Grade | Hard Coat Grade |
| Specific Gravity | ASTM D-792 | 1.19 | 1.19 | |
| Optical | ||||
| Refractive Index | ASTM D-542 | 1.49 | 1.49 (1.53) | |
| Mechanical | ||||
| Elongation | ASTM D-638 | % | 5 | 5 |
| Tensile Rupture Strength | ASTM D-638 | MPa | 70 | 45 |
| Flexural Rupture Strength | ASTM D-790 | MPa | 118 | 60 |
| Impact Strength (Izod) | ASTM D-256 | KJ/m2 | 2 | ----- |
| Rockwell Hardness | ASTM D-785 | 100 | ----- | |
| Thermal | ||||
| Heat Distortion Temperature | ASTM D-648 | ℃ | 110 | 110 |
| Maximum Recommended Continuous Temperature | ℃ | 80 | 80 | |
| Coefficient Of Thermal Expansion | ASTM D-696 | cm/cm/℃ | 7 x 10-5 | 7 x 10-5 |
| Coefficient Of Thermal Conductivity | ASTM D-177 | W/m℃ | 0.17 | 0.17 |
| Specific Heat | J/℃ | 1.47 | 1.47 | |
| Durability | ||||
| Hot Resistance | 80℃ x 100hr | No Change | No Change | |
| Cold Resistance | -40℃ x 100hr | No Change | No Change | |
| Humid Resistance | 60℃ x 90% x 100hr | No Change | No Change | |
| Thermal Cycle | -40℃ ⇔ 80℃ | No Change | No Change | |
| (10 cycles) | ||||
| Electrical | ||||
| Surface Resistivity | ASTM D-257 | Ω | ＞1016 | ＞1016 |
| Volume Resistivity | ASTM D-257 | Ωcm | ＞1016 | ＞1016 |
| Pencil Hardness | 2~3H | 6~8H | ||
| Chemical | ||||
| Methyl Alcohol (50%) | No Change | No Change | ||
| Ethyl Alcohol (50%) | No Change | No Change | ||
| Soap Aqua Solution | No Change | No Change | ||
| Toluene | Dissolved | No Change | ||
| Acetone | Dissolved | No Change | ||
| Benzene | Swollen | No Change | ||
| Ethylene Dichloride | Dissolved | No Change | ||
| Adhesion | K-5400 | 100/100 | ||
| Ethylene Dichloride | Dissolved | No Change | ||
| Flammability | UL standard | Thickness ≧0.8mm | 94HB | 94HB |
| Material | Specular Component | X | Y | Z | L* | a* | b* |
| EX20 | SCI | 3.42 | 3.61 | 3.89 | 22.35 | -0.10 | -0.08 |
| SCE | 0.79 | 0.84 | 0.93 | 7.61 | -0.20 | -0.35 | |
| EX30 | SCI | 3.40 | 3.60 | 3.86 | 22.30 | -0.14 | 0.02 |
| SCE | 1.28 | 1.36 | 1.49 | 11.68 | -0.23 | -0.39 | |
| EX70 | SCI | 3.53 | 3.73 | 4.01 | 22.75 | -0.03 | -0.04 |
| SCE | 0.67 | 0.71 | 0.79 | 6.42 | -0.12 | -0.38 | |
| No.1 | SCI | 3.36 | 3.55 | 3.82 | 22.14 | -0.14 | -0.06 |
| SCE | 0.73 | 0.77 | 0.83 | 6.99 | -0.09 | 0.05 | |
| No.2 | SCI | 3.29 | 3.48 | 3.73 | 21.88 | -0.13 | 0.03 |
| SCE | 1.65 | 1.74 | 1.86 | 14.06 | -0.12 | 0.08 | |
| No.3 | SCI | 3.76 | 3.97 | 4.34 | 23.58 | -0.06 | -0.43 |
| SCE | 3.69 | 3.91 | 4.25 | 23.37 | -0.17 | -0.27 | |
| No.9 | SCI | 3.73 | 3.94 | 4.30 | 23.47 | -0.08 | -0.36 |
| SCE | 0.14 | 0.15 | 0.19 | 1.36 | -0.08 | -0.35 | |
| M-55 | SCI | 3.45 | 3.64 | 3.91 | 22.46 | -0.08 | 0.00 |
| SCE | 2.29 | 2.42 | 2.58 | 17.57 | -0.12 | 0.13 | |
| RH20 Flat | SCI | 4.37 | 4.62 | 5.06 | 25.63 | -0.09 | -0.50 |
| SCE | 0.04 | 0.04 | 0.05 | 0.41 | -0.06 | -0.05 | |
| MHA2100 Flat | SCI | 4.81 | 4.79 | 4.89 | 26.12 | 3.48 | 1.20 |
| SCE | 0.05 | 0.05 | 0.07 | 0.43 | 0.25 | -0.28 | |
| MHA2100 Non-Glare No.1 001 | SCI | 4.67 | 5.19 | 5.57 | 27.27 | -3.17 | 0.00 |
| SCE | 0.09 | 0.08 | 0.21 | 0.70 | 0.71 | -1.89 |
Reflection Measured using Spectrophotomerer SD6000 (Nippon Denshoku), D65 Light Source at 10ﾟangle.
Speak To Us Today About Your Acrylic Requirements
We are happy to answer technical product questions that you may have, including application usage. Further product technical data can also be provided upon request.